Tri-Clamp: 2 Inch Stainless Steel
Stainless Steel 304 (Food and beverage grade) Tri-clamp
R 105.00
Tri-Clamp: 4 Inch Stainless Steel
Stainless steel 304 (Food and beverage grade) Tri-clamp
R 205.00
Tri-Clamp: 3/4 Inch Stainless Steel
Tri- clamp 3/4 inch
R 85.00
Tri-Clamp: 1.5 Inch Stainless Steel
Stainless steel 304 (Food and beverage grade) Tri-clamp
R 95.00
Ball valve 3/4 inch
R 375.00
Ball valve 3/4 inch
Ball valve to fit to bottom of distilling parrot.
R 375.00
Ferrule: 2 inch (21.5mm long) Stainless Steel
2 inch ferrule (21.5 long)
R 65.00
Surge Breaker 2 Inch to 3/4 Inch
A surge breaker
R 595.00
Spirit Condenser: 2 Inch (500 mm - 600 mm long)
2 inch condenser long (500mm)
R 1,395.00
4 inch Complete T-section (Bubble Plate, Clamp and Seal)
Extend your still column to increase distilling efficiency and purity. Complete 4-inch bubble T-section with: S/Steel T-section sight glass Sight glass seal Screw on sightglass cover T-section Seal T-section tri-clamp Copper bubble-plate Copper bubble caps Copper bubble cap risers S/Steel...
R 2,495.00
Blanking Plate: 2 inch Stainless Steel
2 inch sanitary fitting blanking plate
R 95.00
Butterfly valve (1.5 inch)
R 995.00
Butterfly valve (1.5 inch)
A butterfly valve for draining your boiler after distilling. Easy to use and drains relatively quick.
R 995.00
Distilling Parrot: Small Stainless Steel 3/4 inch
Stainless steel parrot to fit to your fractionating column still to determine the spirit ABV% as it leaves the still. Complete with 3/4 inch ferrule connection from still and ball valve, clamp and seal.  
R 1,690.00
Tri-Clamp: 3 Inch Stainless Steel
Stainless steel 304 (Food and beverage grade) Tri-clamp
R 155.00
Bend: 2 inch 90 degree Stainless Steel
2 Inch stanless steel 90 degree bend with 2 x 2 inch sanitary fittings
R 225.00
Reducer: 4 - 2 inch (with thermowell)
Reducer: 4 - 2 inch (with thermowell)
R 1,095.00
Main Reflux Condenser: 4 Inch
R 1,395.00
Main Reflux Condenser: 4 Inch
Stainless steel main reflux condenser - 4 inch (160 mm in length) This main reflux condenser has the ability to remove about 3.5-4kW of heat from steam/vapor Has 1/2 inch threaded coolant inlet and coolant outlet. Apart from using it...
R 1,395.00
Bend: 2 inch 180 degree Stainless Steel
A 180 degree bend for your fractionating column , filled with copper mesh.
R 1,095.00
Tri-Clamp: 6 Inch Stainless Steel
Tri-Clamp 6 inch
R 425.00
Thermometer frame 2 inch
R 450.00
Thermometer frame 2 inch
Thermometer frame for thermometers on boilers 2 inch.
R 450.00
Blanking Plate: 1.5 inch Stainless Steel
A plate to blank off all your extra ferrules on boilers.
R 95.00
Thermometer frame 1.5inch
R 430.00
Thermometer frame 1.5inch
Thermometer frame for thermometers on boilers 1.5inch
R 430.00
Small S/steel tap
R 280.00
Small S/steel tap
These Stainless Steel taps will not corrode or oxidise in acidic or high ethanol envoronments as brass taps might do. 90 degree open/close handle 35mm threaded shaft x 16mm (5/8 inch) thread comes complete with washers, sealing plate, nut and...
R 280.00
Butterfly valve (2 inch)
R 995.00
Butterfly valve (2 inch)
A butterfly valve for draining your boiler after distilling. Easy to use and drains relatively quick.
R 995.00
Ferrule: 4 inch (21.5mm long) Stainless Steel
4 inch ferrule (21.5 long)
R 150.00
The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
You have successfully subscribed!
This email has been registered
ico-collapse
0
Recently Viewed
ic-cross-line-top
Back to Top
ic-expand
ic-cross-line-top